Aml M2800 User Manual download pdf (Page 16)

Model M2800 USB Bar Code and Magnetic Card Reader Page: 16

2190 Regal Parkway • Euless, TX 76040

Phone 817.571.9015 • Fax 817.571.6176

Web Address: www.amltd.com

3) Send All Track Data

ON* Transmit ALL the data from each enabled track. The data is transmitted as it appears on the card

with NO formatting; however, separator characters will be inserted between the fields. See

options 4 and 6 for information on separator characters.

OFF Disables this option

4) Enter the Track 1 Separator Character (valid only with option 3 ON)

Chart Send the Separator Character. This separates the fields found when decoding a track in the

Track 1 format. It is selectable from the full-ASCII menu chart. The default is “^”.

5) Format Expiration Date MMYY (valid only with option 3 OFF)

ON Expiration date sent as MMYY

OFF* Expiration date sent as YYMM

6) Enter Tracks 2 and 3 Separator Characters

Chart Send the Separator Character. This separates the fields found when decoding a track in the

Track 2 or 3 formats. It is selectable from the full-ASCII menu chart. The default is “=”.

MAG STRIPE OPTIONS #2

0) Output

This option designates which track(s) will be output, and in what order. You may use a dual-track

decoder in a single-track application by selecting FIRST TRACK (only) or SECOND TRACK (only).

Select one of the following:

0) First Track (only)

1) Second Track (only)

2)* Both Tracks (output in order)

3) Both Tracks (reverse order)

Note:

The M2800 can auto-discriminate track data formats. It can read Track 1, Track 2, or Track 3

formats on the FIRST TRACK. It can also read Track 2 and Track 3 formats on the SECOND TRACK.

This would mean, for example, that a track 2 and 3 card would be read by the FIRST TRACK and

SECOND TRACK, respectively.

1) Require Two Tracks

ON Both tracks must decode successfully for a “good read” to occur. (Only valid for dual track

readers)

OFF* M2800 will accept one or more valid tracks as a “good read”. If OFF in a dual track application, it

may allow a decode, even if only one track is successfully decoded. Use this setting for single-

track applications.

2) Send Start and End Sentinels (valid only if SEND ALL TRACK DATA is ON)

ON* The Start/End sentinel characters for each enabled track will be transmitted. The characters for

each enabled track will be transmitted. The characters for each type of sentinel are listed below:

1.) Track 1 start: “%”

2.) Track 2 and 3 start: “;”

3.) Track 1, 2, and 3 stop: “?”

OFF Do not transmit the Start/End Sentinel characters.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Comments to this Manuals

No comments

Aml M2800 User Manual Page 16

Comments to this Manuals

Related products and manuals for Computer Accessories Aml M2800