AML M7100 User's Guide download pdf (Page 7)

M7100 Terminal Overview

This chapter describes the features of the M7100 terminal.

o save time in the future, print a copy of this document. Choose Print from the File menu, and

press Enter to receive all the pages of examples and instructions.

Using the M7100 Keyboard

The M7100 Terminal is equipped with fifty-five keys that are divided into white, grey, blue, red,

yellow and black keys. When pressed, each key emits an audible beep to indicate that the M7100

terminal has detected the key press.

The red power key turns the M7100 on/off. You must press and hold

this key down to power off the unit. This prevents accidentally

powering off the unit if this key is momentarily pressed.

Note: The Power Key Wake-up feature is only available on units with

Decoder version 2.0 or later. On earlier versions the power key will

immediately shut off the unit. The Decoder can only be programmed at

the factory.

The white/black “light bulb” key turns on/off the display backlight.

The backlight will automatically shut off after a predetermined time

has expired. This predetermined time can be programmed by the user.

The yellow [SCAN] button activates the M7100 scan engine. The

button is conveniently located for right or left hand use.

The seven blue keys consist of [Func], four arrow keys and two

[ENTER] keys (for right or left hand use). The [Func] key activates

Chapter

1 2 3 4 5 6 7 8 9 10 11 12 ... 130 131

No comments

AML M7100 User's Guide Page 7